1H36M21S Countdown
Limited Time Offer Ends In:
01
HRS
36
MIN
21
SEC

Retractable Ratchet Tie-Down Straps — 2-Pack

$39.99 USD
Shipping fees will be calculated at checkout.
Color
Style
i LAST UPDATE:
We're going viral on social media and stock is running low.
Order now before it's sold out again!
Retractable Ratchet Tie-Down Straps

Secure the load.
Reel in the slack.

Set up a tie-down without leaving a length of loose webbing on the deck. Extend the 2 in strap between suitable anchors, take up the slack with the built-in reel, then tension and lock the ratchet. Each kit includes coated S-hooks, matching soft loops and a storage bag for your next load.

Green two-strap kit showing two ratchets, two soft loops, coated hooks and the drawstring bag
2 in

Webbing width

10 ft

Standard length. Camo is 9 ft.

1,011 lb

Listed working load limit per strap

3,033 lb

Listed break strength per strap

How the reel, ratchet and hooks work together

There are two separate jobs in each tie-down. The reel gathers excess webbing during setup, and the ratchet handle applies the final tension before travel. At each end, a coated hook or an appropriately rated soft-loop connection secures the strap to a compatible anchor.

Retractable ratchet mechanism with its green control and wound webbing

Unroll the length you need

The reel holds the unused portion of the strap inside the ratchet housing. Extend enough webbing to reach both anchor points, then use the retraction control to gather loose material. It’s useful when you move between a short run in a truck bed and a longer route on a trailer.

Coated full-bend S-hook with its retaining clip and woven strap

Check the hook fits the anchor

The full-bend S-hooks have retaining clips, and the coating provides a layer between metal and the contact surface. A suitable anchor lets the hook seat fully with the clip closed. If the hook cannot fit directly, check whether a rated soft loop is appropriate for that attachment point.

Use the handle to tension and lock

Once the webbing is routed and the slack is removed, use the padded handle for the tightening step. Follow the supplied directions for the locked travel position. Place the ratchet where you can reach it for checks and where it won’t press against delicate surfaces.

Give the webbing a clear path

The 2 in polyester webbing should lie flat along its route. Choose contact points that keep the strap from rubbing on sharp edges, or add suitable edge protection. Inspect the webbing, stitching, hooks and clips before each trip.

Plan for the load you carry

The size and shape of the load, the location of rated anchors and the space around the ratchet all affect which setup fits.

Product detail showing a ratchet, stitched webbing and coated hook during trailer loading

Truck bed

For tool cases, totes or equipment, identify the bed’s rated anchors and keep the straps away from sharp lids or corners. Leave room to operate the handle after the load is placed.

Cargo trailer

Check the distance from the deck anchors to your planned contact points. Arrange the load and plan the tie-down directions so the cargo is restrained against shifting during transport.

Equipment and recreational gear

Check the equipment’s approved attachment locations and instructions. A properly rated soft loop may help where a hook cannot seat directly. Secure moving parts as directed before setting off.

Check the fit before you choose

Pick the length for the route the strap actually follows and the pack size for your complete securement plan.

Measure the full route

Measure along the path between anchors, including any distance up and over the load. Standard colors are listed at 10 ft, while the camo option is 9 ft.

Confirm clearance

Check that the 2 in webbing can sit flat, the hooks and clips can seat at the anchors, and the padded handle has room to move. Account for any additional reach needed by a soft loop.

Read the ratings on your gear

The listed working load limit is 1,011 lb per strap. Check the actual label and the ratings of your anchor points and accessories before relying on the setup. The 3,033 lb figure refers to the listed break strength.

From setup to unloading

Follow the instructions supplied with your straps for handle positions, locking and release. Use these stages to plan how you’ll secure and unload your cargo.

Check the strap and anchors

Inspect the webbing, stitching, ratchet, clips and hooks. Check the ratings of the strap, anchor points and any accessories. Choose a path clear of sharp edges, or use suitable edge protection.

Connect and reel in slack

Seat both hooks in compatible rated anchor points with the clips closed. Keep the webbing flat and untwisted as you gather the excess with the reel.

Ratchet, lock and check

Use the handle to tension the strap and confirm the ratchet is in its locked travel position. Check the load, hooks and tension before driving and check again during stops.

Unload and store

Make sure the cargo is stable before releasing the straps. Guide the hook and webbing as they retract, then store the dry straps in the included bag.

Use the working load limit for planning. The setup depends on the cargo, anchor ratings and any accessories in use. This product is for securing cargo during transport. Use purpose-rated equipment for lifting, towing or recovery.

Choose your pack

Both options pair each strap with a soft loop. Start with the number of tie-downs your cargo setup requires, then consider whether you want spare straps available for another load. Each pack has its own storage bag.

2-Pack

Drawstring storage bag
  • 2 retractable ratchet straps
  • 2 soft loop tie-downs
  • 1 drawstring storage bag

4-Pack

Duffel-style storage bag
  • 4 retractable ratchet straps
  • 4 soft loop tie-downs
  • 1 duffel-style storage bag

Specifications at a glance

Check the length against the actual route between your anchor points, including any turns around the load.

Webbing2 in wide polyester with reinforced stitching at the connections
Length10 ft for standard colors. Camo is 9 ft.
RatchetSelf-retracting mechanism, padded handle and zinc-coated hardware
HooksCoated full-bend S-hooks with retaining clips
Listed strap working load limit1,011 lb per strap
Listed strap break strength3,033 lb per strap

Five-star buyer photos

Six selected five-star reviews from the product listing. Each summary is paired with a photo from that buyer, with brand marks removed from the images.

Buyer photo of the kit bag on a trailer deck

Sturdy after a real trip

This buyer waited until after using the straps to leave feedback, and was impressed by the sturdy materials and assembly.

D**o ** · Verified purchase
Black 4-Pack · April 8, 2025
Buyer photo of green webbing wound on a ratchet spool

Less time spent setting up

This buyer found that the straps worked well and saved time. They said they would recommend the set.

B**n · Verified purchase
Green 2-Pack · April 1, 2025
Buyer unboxing photo showing two blue straps

Happy with the blue set

This buyer was pleased with the straps and glad they chose the blue two-pack.

E**1 · Verified purchase
Blue 2-Pack · December 11, 2024
Buyer photo of a black strap and its ratchet laid out on the ground

A transporter’s first impressions

The buyer transports loads and wants dependable straps. They reported good results with the black set so far.

A**e · Verified purchase
Black 4-Pack · October 1, 2026
Buyer photo of a person holding the green-trimmed kit bag

A welcome gift for farm use

The buyer’s husband uses straps regularly on the farm and was happy to receive this set.

L**a W**t · Verified purchase
Green 4-Pack · August 4, 2025
Buyer photo showing the ratchet on the deck of a utility trailer

Planning to pick up more sets

This buyer liked the two-pack after getting familiar with the mechanism and planned to get more for their truck.

K**U (**) · Verified purchase
Black 2-Pack · July 26, 2026

Common questions

Does the reel keep tension on the strap during transport?

The reel takes up excess webbing during setup. Tension and lock the strap with the ratchet according to the supplied instructions, and recheck it during stops.

Which length comes with each color?

The standard colors are listed at 10 ft. The camo version is listed at 9 ft. Both measure 2 in wide.

What’s the difference between the two load ratings?

The working load limit is the rating to use when planning and checking a tie-down setup. Break strength is the listed failure-test value. Check the actual strap label and the ratings of the other components in the setup.

When should I use a soft loop?

A soft loop can help when the S-hook cannot seat directly in a suitable rated anchor. Verify the loop’s own rating, and keep it clear of sharp edges.

Should I choose the 2-Pack or the 4-Pack?

Choose based on the number of tie-downs required for your load and the rated anchors you can use. The packs have the same strap design and include a soft loop for each strap.

What comes in the bag?

Each set includes either two or four retractable ratchet straps and the same number of soft loops. The 2-Pack has a drawstring storage bag. The 4-Pack has a duffel-style storage bag.