🎉Last Day Clearance Sale💝
-
Free worldwide shipping
-
Free returns
-
Carbon neutral
-
Secure payments
No Wires. No Drilling.
Just Stick Them On.
Magnetic or screw-mounted LED tail lights that talk to your truck over 2.4GHz from up to 100 feet away. Ready in minutes — for any trailer you hook up to.
Wiring a trailer means crawling under the bumper, splicing four wires, hunting a bad ground — and doing it all over again for the next trailer.
Clip the transmitter into your 7-pin socket, stick the lights on, and drive off in minutes.
100 Feet, Not 33.
The transmitter uses a premium chipset and a built-in antenna instead of the cheap pair you find in most kits. The result is a stable 2.4GHz signal that still reaches the lights when your trailer is three vehicles back — long trucks, boat trailers and car haulers included.
Two Ways To Mount, One Minute Either Way
Set the lights down on the steel bumper or tailgate and the rubber-coated magnet holds them through the whole trip. Prefer something permanent? The base has four screw holes — drop in the supplied washers and bolt it down. The base detaches, so one kit can move between trailers.
Sealed For Rain, Spray And Salt
IP67-rated housings keep water out of the electronics, so a wet boat ramp or a downpour on the highway is not a problem. The lenses are polycarbonate — the same class of material used on production vehicle lights — and the housings are red to match the lens.
2.5 Hours To Charge, 8 Hours Of Light
Both lights charge from USB — no coin cells, no hunting for a power wire. A full charge covers a 2.5-hour top-up and up to 8 hours of use, with indicator lights on the side so you know before you leave. The switch sits on the housing, reachable without pulling the light off the bumper.
What's In The Case
Two LED lights (4.2 x 4.2 in each), one wireless transmitter, a 7-pin round to 4-pin flat adapter, USB charging cable and the carry case. The lights pack down into a case the size of a lunchbox, so the whole kit lives in the truck bed instead of the garage shelf.
Specifications
| Item | Detail |
| Model | AG-T28 wireless LED trailer light kit |
| Signal | 2.4GHz wireless, built-in antenna, 100 ft / 30.5 m range |
| Light functions | Tail, brake, turn signal and license plate light (DOT compliant) |
| Mounting | Rubber-coated magnetic base or screw holes with washers |
| Waterproof rating | IP67 |
| Battery | Rechargeable via USB — 2.5 hours charge, up to 8 hours use |
| Connector | 7-pin round to 4-pin flat adapter included |
| Wattage | 5 W |
| Lens | Red polycarbonate |
| Light size | 4.2 x 4.2 in per light |
| Works with | Trucks, boat trailers, RVs, tractors, tow trucks |
| Warranty | 2 years |
One Kit, Every Trailer You Own
Because nothing is hard-wired to a specific vehicle, the same kit moves from the boat trailer to the utility trailer to the equipment hauler. Carry the steel wire in the case and thread it through the bracket as a backup tie-down if you are running over rough ground.